AX01 Controller Adapter - Setup Guide & Tutorial
Learn how to set up your AX01, connect your controller, and troubleshoot common connection issues.
Before You Start
What Is AX01?
AX01 is a cross-platform controller adapter designed to let you use compatible controllers across supported gaming consoles.
It features a simple wired setup with no app or complicated configuration required.
Key Features
Cross-Platform Controller Conversion
Use compatible controllers across supported gaming platforms.
Plug & Play
No app or complicated configuration required.
1000Hz Polling Rate
Fast and responsive controller input.
Stable Wired Connection
Designed for a stable gaming connection.
Note: Bluetooth controller connections are not supported.
Supported Platforms
Choose your gaming platform and check the setup requirements.
PS5
Connection
Wired Connection
Requirement
P5 NEX PLUS Required
PS4
Connection
Wired Connection
Requirement
Direct Connection
Xbox One / Series X|S
Connection
Wired Connection
Requirement
Original Xbox Controller Required
Switch / Switch 2
Connection
Wired Connection
Requirement
Direct Connection
Controller compatibility may vary by controller model,
firmware version, and connection method.
Before Connecting AX01
Enable wired controller communication on your console before setup.
PS5
Set the controller communication method to USB.
Settings
↓
Accessories
↓
Controller
↓
Communication Method
↓
Use USB Cable
PS4
Set the controller communication method to USB.
Settings
↓
Devices
↓
Controllers
↓
Communication Method
↓
Use USB Cable
Switch / Switch 2
Enable wired Pro Controller communication.
System Settings
↓
Controllers and Sensors
↓
Pro Controller Wired Communication
↓
ON
Xbox Users
No additional wired controller setting is required.
SKIP THIS STEP
Settings menus may vary slightly depending on the console system version.
Get Connected in 4 Simple Steps
Follow the steps below to connect AX01 to your gaming platform.
STEP
1
PS5 · PS4 · Switch / Switch 2
Enable Wired Controller Connection
Make sure wired controller communication is enabled on your console before setup.
Xbox Users:
Skip this step.
Skip this step.
STEP
2
All Supported Platforms
Connect AX01 to Your Console
Plug AX01 into a USB port on your console.
PS5 · PS4 · Xbox One / Series X|S · Switch / Switch 2
STEP
3
PS5 / Xbox Only
Connect the Required Device
Connect the required device to AX01 before connecting the controller you want to use.
PS5
Connect P5 NEX PLUS
Xbox
Connect an Original Xbox Controller
PS4 / Switch
Skip this step.
Connect P5 NEX PLUS
Xbox
Connect an Original Xbox Controller
PS4 / Switch
Skip this step.
STEP
4
Final Step
Connect Your Controller
Connect the controller you want to use to AX01, then check the status light.
PS5
PS4
Xbox
Switch
White — Connection Failed
If the connection is unsuccessful, check your console settings,
required device, controller connection, and connection order before trying again.
Controller Compatibility
Find your controller and check the tested connection methods for AX01.
Showing 25 tested controllers
← Swipe to view all connection methods →
| Brand | Controller Model | Xbox Wired | Xbox 2.4GHz | Switch Wired |
|---|---|---|---|---|
| FDG | Octopus 4 | ✓ | ✓ | — |
| FDG | Octopus 5 | ✓ | ✓ | — |
| FDG | Vader 4 | ✓ | ✓ | ✓ |
| FDG | Vader 5 | ✓ | ✓ | — |
| FDG | Vader 5s Xbox | ✓ | — | — |
| FDG | Apex 4 | ✓ | ✓ | — |
| FDG | Desert Fox | ✓ | ✓ | — |
| BEITONG | KP20 | ✓ | — | — |
| BEITONG | KP40 | ✓ | ✓ | — |
| BEITONG | KP50 | ✓ | ✓ | — |
| BEITONG | KP70 | ✓ | ✓ | — |
| BEITONG | PanGu | ✓ | ✓ | — |
| BEITONG | Jiuwei Fox | ✓ | ✓ | — |
| BEITONG | Cyclone 2 | ✓ | ✓ | — |
| GameSir | G7 Pro | ✓ | ✓ | — |
| GameSir | G7 Pro 8K | ✓ | — | — |
| GameSir | G7 SE | ✓ | — | — |
| BIGBIG WON | Rainbow 2 Pro | ✓ | ✓ | — |
| BIGBIG WON | Blitz 2 | ✓ | ✓ | — |
| 8BitDo | Ultimate | ✓ | ✓ | — |
| Razer | V3 Pro | ✓ | ✓ | — |
| FIGHT FOR ME | Super Legend | ✓ | ✓ | — |
| FIGHT FOR ME | Zero Plus | ✓ | ✓ | — |
| EasySMX | S10 | ✓ | — | — |
| Manba | Manba One | ✓ | ✓ | — |
No matching controller found. Please check the model name or contact AIMZENIX Support.
✓
Tested & Supported
—
Not Supported
Compatibility may vary by controller model, firmware version,
and connection method. This list reflects tested configurations
and may be updated as additional controllers are verified.
Troubleshooting
Having trouble connecting? Start with these common checks.
LED Stays White The connection was not established.
A white LED indicates that the connection was not completed successfully.
- Make sure AX01 is connected directly to the console.
- Check that your controller is using a supported wired or 2.4GHz connection method.
- For PS5, make sure P5 NEX PLUS is connected correctly.
- For Xbox, make sure an original Xbox controller is connected to the authentication port.
- Disconnect AX01 and reconnect the devices following the Quick Setup steps above.
Controller Not Responding Check the controller and connection method.
Make sure the controller is connected to the correct AX01 port and is using a supported connection method.
Disconnect the controller, reconnect it to AX01, and wait for the AX01 indicator to remain solid.
Check the Controller Compatibility section above for tested controller models and connection methods.
PS5 Connection Failed Check P5 NEX PLUS and USB settings.
P5 NEX PLUS is required when using AX01 with PS5. Make sure it is connected correctly before connecting the controller you want to use.
Also make sure wired controller communication is enabled on your PS5:
Settings → Accessories → Controller → Communication Method → Use USB CableXbox Connection Failed Check the authentication controller.
AX01 requires an original Xbox controller for authentication when used with Xbox One or Xbox Series X|S.
Connect the original Xbox controller to the authentication port on AX01, then connect the controller you want to use.
PS4 / Switch Setup Issue Make sure wired communication is enabled.
PS4
Settings → Devices → Controllers → Communication Method → Use USB CableSwitch / Switch 2
System Settings → Controllers and Sensors → Pro Controller Wired Communication → ONThird-Party Controller Not Working Compatibility varies by model and connection.
Controller compatibility may vary by model, firmware version, and connection method.
Check the Controller Compatibility section above to confirm whether your controller and connection method have been tested with AX01.
Frequently Asked Questions
Quick answers to common questions about AX01.
What is AX01?
AX01 is a controller adapter designed for cross-platform gaming. It allows supported controllers to be used across compatible PlayStation, Xbox, and Nintendo Switch platforms.
Which gaming platforms does AX01 support?
AX01 supports PS5, PS4, Xbox One, Xbox Series X|S, Switch, and Switch 2.
PS5 requires P5 NEX PLUS. Xbox One and Xbox Series X|S require an original Xbox controller for authentication.
Does AX01 require an app?
No. AX01 does not require an app for setup or everyday use.
Does AX01 support Bluetooth controllers?
No. AX01 does not support direct Bluetooth controller connections.
Use a supported wired or 2.4GHz connection method instead.
Can I use a wireless controller with AX01?
Some compatible controllers can be used through a supported 2.4GHz wireless receiver.
Direct Bluetooth connection is not supported. Check the Controller Compatibility section for tested controller models and connection methods.
Do I need P5 NEX PLUS for PS5?
Yes. P5 NEX PLUS is required when using AX01 with PS5.
Connect P5 NEX PLUS to the AX01 authentication port during setup.
Why do I need an original Xbox controller?
When AX01 is used with Xbox One or Xbox Series X|S, an original Xbox controller is required for authentication.
Connect the original Xbox controller to the AX01 authentication port during setup.
Can I connect multiple controllers to AX01?
No. AX01 is designed for one controller connection at a time and does not support multiple controllers simultaneously.
Does AX01 support headsets or controller audio?
No. Headset and controller audio functions are not supported through AX01.
Can I adjust controller parameters with AX01?
No. AX01 does not provide parameter adjustment or advanced controller configuration features.
AX01 is designed primarily for simple controller conversion and cross-platform use.
AIMZENIX DISCORD
Scan QR code to join the discord or click the link here to join the discord
- Choosing a selection results in a full page refresh.