MONSTER Diagram

CONNECT MONSTER to PS5

SETTINGS ON THE PS5

Go to “Settings > Accessories > Controller > Communication Method > Use USB Cable”

MONSTER Connection Steps

①Plug MONSTER into your PS5 console using the Type-C data cable from the packaging. The Indicator light on the MONSTER flashes white. 

②Connect an Ethernet cable from the router that is on the same local network as your PS5 console to the Ethernet port of the MONSTER. (Then wait for Remote Play pairing.)

③Connect the keyboard/mouse to the keyboard/mouse interface.

(If you are using a high-power , it is recommended to connect an extra power supply to MONSTER.)

After submitting your account, enter the eight-digit pairing code from the PS5 console in step 2, and then click "Save Config". Wait 15-30 seconds until the purple indicator light turns

solid, indicating that MONSTER has successfully connected to the PS5.

 PS5 Remote Play Binding Steps

①Connect to the GEEKVICE APP and switch the MONSTER to PS5 Mode (make sure the light of the ethernet port is on, if not, please reseat it.) 

②Use the PS5 controller to open the PS5 Remote Play pairing:  

“Settings -> System -> Remote Play -> Enable Remote Play”.  

On the Associate Devices page, an eight-digit pairing code will be generated.  

Please complete the following steps as soon as possible within the pairing validity period.

 

③Switch to P5 mode and Click "Bind" on the card. select PS login for the first login, which will redirect you to Sony's official login page. Enter the account and password used on the PS5 console, and after signing in, you will be redirected to a blank page. Click "Submit".

 

④After submitting your account, enter the eight-digit pairing code from the PS5 console in step 2, and then click "Save Config". Wait 15-30 seconds until the purple indicator light turns solid, indicating that MONSTER has successfully connected to the PS5.

 

NOTES:

① After PS5 Remote Play is successfully bound, there is no need to re-bind. Please make sure that the PS5 is logged in with the same account and is in the same local area network)

②Make sure you have connected the network cable before entering the pairing code. If not,  please get the pairing code again on the PS5.

APP SETTING Steps

① For connection steps, please refer to the APP connection instructions below)

②Make sure the application is configured for the corresponding game platform)

③ For more detailed tutorials, please go to GEEKVICE APP SETTING STEPS page.

Connection troubleshooting:

If the connection is not successful and the purple light is flashing for PS5 with MONSTER, you

can try the following solutions：

① Check if the Ethernet cable connected to the MONSTER is the same network as the one

used by the PS5 console)

② Verify that the account logged into the PS5 console matches the account bound to the app

③ Double-check the accuracy of the eight-digit pairing code entered.

④ Ensure that Remote Play is enabled on the PS5 console)

⑤ Check if the Ethernet port on the MONSTER has a solid light indicating a proper)

⑥ Try using a different Ethernet cable to connect the MONSTER and the PS5 console.

 

CONNECT MONSTER to PS4/PS3

settings on the ps4 (PS3: Skip this setting)

Go to “Settings > Devices > Controllers > Communication Method > Use USB cable”

MONSTER Connection Steps

①Plug MONSTER into your PS4/PS3 console using the Type-C data cable from the packaging. The Indicator light on the MONSTER flashes white. 

② Connect to the GEEKVICE APP and switch the MONSTER to Universal Mode.

②Use the micro-USB data cable from the packaging to connect the PS4/PS3 original controller to the controller port of the MONSTER. If the indicator light is solid blue, the connection is successful.

(It is recommended to turn off the controller before connecting it to the MONSTER.)

④Connect the keyboard/mouse to the keyboard/mouse interface.

(If you are using a high-power keyboard/mouse, it is recommended to connect an extra

power supply to the MONSTER.)

APP SETTING NOTES

① For connection steps, please refer to the APP connection instructions below.

② Switch the MONSTER to Universal Mode.

③ Make sure the application is configured for the corresponding game platform)④ For more detailed tutorials, please go to the GEEKVICE APP SETTING STEPS page.

Connection troubleshooting:

If the connection is not successful and the white light is blinking, you can try the following  Solutions:

① Check if you have selected the USB wired connection method in the PS4 console settings)

② Replug the data cable connecting the controller)

③ Turn off the controller and then connect it to the converter)

④ Make sure the data cable connected to the PS4/PS3 console is plugged into the MONSTER

data port, not the power port)

⑤ Try using a different USB port on your console)

⑥ Ensure that the PS4 controller is an original controller)

⑦ Try using a different data cable.

 CONNECT MONSTER to XBOX

 

MONSTER Connection Steps

①Plug MONSTER into your XBOX console using the Type-C data cable from the packaging. The Indicator light on the MONSTER flashes white. 

②Connect to the GEEKVICE APP and switch the MONSTER to Universal Mode

③Use the USB data cable from the packaging to connect the XBOX original controller to the  controller port of MONSTER. If the indicator light is solid green, the connection is successful.

(It is recommended to turn off the controller before connecting it to MONSTER.)

④Connect the keyboard/mouse to the keyboard/mouse interface.

(If you are using a high-power keyboard/mouse, it is recommended to connect an extra power supply to MONSTER.)

APP SETTING NOTES:

① For connection steps, please refer to the APP connection instructions below

② Switch the MONSTER to Universal Mode

③ Make sure the application is configured for the corresponding game platform)

④ For more detailed tutorials, please go to the GEEKVICE APP SETTING STEPS page

Connection troubleshooting:

If the connection is not successful and the white light is blinking, you can try the following

Solutions：

①Ensure that the controller is the original controller of the corresponding game console. The authorized controller is not supported).

②Replug the data cable connecting the controller)

③Turn off the controller and then connect it to the MONSTER)

④Make sure the data cable connected to the XBOX console is plugged into the AX600 data port, not the power port)

⑤Try using a different USB port on your console)

⑥Try using a different data cable.

CONNECT MONSTER to NS

 

settings on the NS console

Go to Switch “System Settings > Controller and Sensors > Pro controller Wired Connection”,

and adjust it to the “ON” state 

MONSTER Connection Steps

①Connection method 1 : Plug MONSTER into your NS console using the Type-C data cable and OTG adapter from the packaging. The Indicator light on the MONSTER flashes white.

   Connection method 2: If you're in TV mode, plug MONSTER into the N-Switch TV Dock with the Type-C data cable. The Indicator light on the MONSTER flashes white.

②Connect to the GEEKVICE APP and switch the default mode in the device information to Switch Launch Mode. If the indicator light is solid red, the connection is successful.

③Connect the keyboard/mouse to the keyboard/mouse interface..

(If you are using a high-power keyboard/mouse, it is recommended to connect an extra power supply to MONSTER.)

APP SETTING steps:

① For connection steps, please go to the GEEKVICE APP SETTING STEPS page.

② Make sure the application is configured for the corresponding game platform.

Connection troubleshooting:

If the connection is not successful and the white light is blinking, you can try the following  Solutions:

① Check if you have selected the Pro controller wired Connection in the NS console settings)

②  Make sure the Default model in the device information is switched to Switch Launch Mode

③ Replug the data cable connecting the controller

④ Turn off the controller and then connect it to the converter

⑤ Make sure the data cable connected to the NS console is plugged into the MONSTER data port, not the power port)

⑥Try using a different USB port on your console)

⑦ Try using a different data cable.

 

CONNECT MONSTER to PC

settings on the PC

It is recommended to start platforms that support gamepads on PC first, such as STEAM, EA, or the game controller test page.

MONSTER Connection Steps

①Plug MONSTER into your PC using the Type-C data cable from the packaging.

The Indicator light on the MONSTER flashes white.

②Connect to GEEKVICE APP. It is recommended to switch the default mode in the device  information to X360 Launch Mode (this mode supports the "FLEX MAPPING" function). If the

indicator light is solid green, the connection is successful..

You can also choose PS4 mode (blue light) and SWITCH mode (red light)

③Connect the keyboard/mouse to the keyboard/mouse interface.

(If you are using a high-power K&M, it is recommended to connect an extra power supply to  MONSTER.)

APP SETTING steps

①For connection steps, please go to GEEKVICE APP SETTING STEPS page)

② Make sure the application is configured for the corresponding game platform.

NOTES:

Since your keyboard and mouse are connected to the PC through MONSTER, the computer will  recognize them as a gamepad, which means you can't control them like a traditional keyboard and mouse. You can switch between Controller Mode and Keyboard and Mouse Mode through the FLEX MAP function. For detailed settings, please go to the official website to view the video tutorial. 

Connection troubleshooting:

If the connection is not successful and the white light is blinking, you can try the following  Solutions:

① Replug and restart the computer)

① Update the USB driver)

②  Change the USB port)

③  Connect the MONSTER to the docking station)

④  If you have changed the default mode to Switch or PS4 mode in the app, make sure to open  the testing website or Steam platform to recognize it as a controller for successful connection.

 

APP connection steps

①Install the mobile app: You can scan the QR code below or search for "GEEKVICE" in the Google/APP Store and install it. (Make sure the app is the latest version) 

②When you install the app for the first time, the app will request Bluetooth and location permissions. Please select Allow authorization for all permissions to avoid connection failures.

③Add a MONSTER connection via the GEEKVICE app:

APP Connection troubleshooting

(1) Check whether the indicator light of converter is on normally；

(2) Check whether Bluetooth permission and location permission are enabled；

(3) Since the device needs to be connected through app scanning, if you have already connected the device's Bluetooth in the phone's Bluetooth settings, please cancel the pairing and use the app to scan and connect again.

 

Firmware Update

After successfully connecting, please make sure your device firmware is up to date. If a version upgrade is available, you'll see a prompt for 'New Firmware'. Click it to complete the upgrade.