P5 NEX PLUS GUIDE

1.Product Usage Instructions

Plug the P5 NEX PLUS directly into the USB port of your target device to start using it. (For example: GP2040-CE arcade controllers (RP2040-based), XIM MATRIX, AIMZENIX adapters, etc.)
Important Notes
  • Please connect your device to the PS5 console using a wired connection.
  • Before use, make sure the PS5 USB communication method is enabled.
PS5 Setting Path: Sign in → Settings → Accessories → Controllers (General) → Communication Method → USB Cable

2.Connection Diagram

Please refer to the diagram below for connection instructions.

3.P5 NEX PLUS Connecting to a Keyboard & Mouse Adapter

Example: Connecting to Prelude (AX360P)
Important Notes：
Make sure your adapter firmware is updated to a version that supports P5 NEX PLUS.
Connect the adapter to the PS5 using a USB cable.
  1. Insert the P5 NEX PLUS into the USB port on the adapter marked with a controller icon.
  2. When the adapter shows a solid purple light, the connection is successful. You can now connect your keyboard and mouse to control the system.
  3. When the adapter shows a solid purple light, the connection is successful. You can now connect your keyboard and mouse to control the system.
Troubleshooting:
  • Check if your adapter firmware version supports the P5 NEX PLUS (e.g., version 2106 or above).
  • Ensure the USB cable used between the adapter and PS5 supports data transfer.

4.Connecting to GP2040-CE arcade controllers (RP2040-based)

Step 1: Check Firmware Version
Make sure your GP2040-CE firmware version is 0.7.7 or above.
Firmware Update Instructions：
  1. Hold the START button on the arcade controller and connect it to your PC using a USB cable.
  2. Open your browser and go to: http://192.168.7.1/
  3. Extract the downloaded Hitbox firmware package on your computer.
On the website, click the reboot button in the top-right corner and select USB (BOOTSEL).
A drive named RP1-RP2 (E:) will appear on your PC. Drag and drop the firmware file into this drive. Wait for the transfer to complete (the drive will disappear automatically).
Step 2: Set Mode
  1. Hold the START button again and reconnect to your PC.
  3. In settings, select P5General mode and save.
Step 3: Peripheral Mapping Configuration
  1. In the Function Configuration section, select Peripheral Mapping.
  2. Enable USB0 D+ and set the value to 26. If the connection fails, try using a different pin, such as Pin 23. For the correct pin assignment for your specific model, please contact the manufacturer of your device.
Step 4: Reboot to Gamepad Mode
  1. Click the reboot button in the top-right corner of the webpage.
  2. Select Game Controller Mode.
Step 5: Connect to PS5
  1. Connect the arcade controller to the PS5. Insert the P5 NEX PLUS into the USB port of the arcade controller. A breathing green light indicates a successful connection.
  2. Press the HOME button on the arcade controller to start controlling.
  • If connection fails or disconnects after 8 minutes, contact your arcade controller manufacturer for support and compatibility confirmation.
  • Some arcade controllers require holding the A/Y button while connecting to the PS5 before inserting the P5 NEX PLUS.

5.Firmware Upgrade for P5 NEX PLUS

1. Download the P5_NEX_OTA package below and extract it on your computer.
2.Double-click P5_NEX_OTA.exe to launch the upgrade tool.
3.Connect the P5 NEX PLUS to your PC. Wait 10–20 seconds until the upgrade is complete, then unplug the device.

AIMZENIX DISCORD

Scan QR code to join the discord or click the link here to join the discord

Click here

P5 NEX PLUS GUIDE

Below FAQ are some common concerns of our clients before purchasing the theme.
If you have other questions, please just send it to service@aimzenix.com.

Filter by topic
All
  • All
  • Pre Sale Questions

Need Help?

If you have an issue or question that requires immediate assistance, you can click the button below to chat live with a Customer Service representative.

If we aren’t available, drop us an email and we will get back to you within 20-36 hours!

Pre Sale Questions

Simply plug the P5 NEX PLUS into the USB port of the target device to start using it.

Before use, set the PS5 controller connection method to USB cable: Settings → Accessories → Controller (General) → Connection Method → USB Cable.

Make sure the converter firmware supports P5 NEX PLUS. Connect the converter to PS5, plug the P5 NEX PLUS into the controller-marked USB port, and wait for the indicator light to confirm connection.

Ensure the GP2040-CE firmware is version 077 or above. Set mode to P5General, enable USB mapping, then plug the P5 NEX PLUS into the device USB port.

Connect the device to a PC, run the P5_NEX_OTA tool, and wait 10–20 seconds until the update is completed.

Unable to find satisfactory answers ? Contact Support